Have you ever had trouble with sewing on uneven surfaces or with textured fabrics? Then the Husqvarna Viking Roller foot is perfect for you.
As the name suggests, the Roller foot has 4 rollers inserted into the foot, a bit like a car has four wheels When the Roller foot is attached to your machine, the rollers allow the fabric to feed easier under the foot, while the feed dogs grip the fabric from underneath. This makes stitching on these fabrics effortless and eliminates any sticking to the fabric.
The Roller foot is perfect to use with vinyls, leathers, velvets and any other fabrics with naps or loops. Heavier or thicker quantities of fabric are also a breeze to sew when using this foot, feeding in a smooth and even fashion.
The Roller foot is best used with any forward motion stitch, such as a straight stitch, zig-zag or any other forward motion utility or decorative stitch.
Instructions for use:
1 - Snap on the Roller Foot
2 - Select any forward motion stitch and sew.
Conclusion:
Is the Roller Foot just for thick fabrics? No, you can also use the roller foot with slippery fabrics like chiffon or stretch fabrics with a nap, such as stretch velvet. As always, take the time to sew a sample to find to right stitch length, stitch width and tension to suit your needs.
The Roller Foot part number is H4129902-45 and is suitable for all models from 1-9. It is available online, or at your nearest Husqvarna Viking dealer.
The embellishment is created when sewing using the specially designed stitches for this foot together with yarn. The effect of the embellishment can be changed dramatically by using different types of yarn.
The presser foot is designed to be used with specially
designed stitches. Note: No stitches except for specially designed stitches can be used.
The Yarn Foot is equipped with an adjustment wheel. The wheel is used to fine-tune the red line so that it matches the center needle position on the foot. When the needle is centered at the redline, it is more likely that the Yarn Foot will pick up a wider range of yarn.
Instructions for use:
1 - Thread the machine with a thread that coordinates with your decorative yarn or use transparent thread.
2 - Attach the yarn guides to your machine in the notches under the handle at the rear side of the machine
3 - Pull out as much yarn as you need from the ball of yarn and place it as shown in. Make sure to pull out the yarn continuously to avoid too much strain on the yarn.
4 - Place the yarn in the yarn guides. It is very important that the yarn runs smoothly while you are sewing.
5 - Thread the yarn from above through the hole in the Yarn Foot using the yarn threader. We recommend using yarn with an even thickness. For the best result, the yarn should fill the hole in the foot but still run easily through it.
6 - Snap the Yarn Foot onto the machine.
7 - Select the stitch you want to sew. Before starting to sew, use the adjustment wheel to make sure the redline on the Yarn Foot is matching the needle.Â
Tips: Draw a line on the fabric with a fabric marker, for easier guidance.
Note: Some yarns work better than others. Yarn with a looser structure will often give a better result. The Yarn Embellishment Foot Set part number is H9204030-96 for all models 8*, 9* machines.
Now that you know how to use the fantastic Yarn Embellishment Foot Set, why not add it to your collection today? You can purchase it on our webite: Yarn Embellishment Foot Set
If you are not sure what HUSQVARNA VIKING sewing machine model you have? Check the Machine Compatibility Chart to ensure your machine is compatible. Don’t forget to share your projects with us on Instagram, tagging @husqvarnavikingsewingaus and using the hashtags #keepingtheworldsewing or our Facebook page Husqvarna Viking Australia.
Do you want to embellish some ready-made clothing?
Do you have trouble hooping the garment without pulling, stretching, or sewing on another part of the garment? (And yes, we have all done that!)
Or do you have some delicate fabricates which are either difficult to hoop or should not be hooped at all?
If your answer is yes to any of these questions, then the Metal Hoops are the answer for you!
These unique hoops are a combination of a metal base with a series of magnets that attach on top of the hoop, sandwiching the fabric in between. The base is a flocked surface, to prevent your fabric from sliding and raised markings on the hoop indicate the centre of the embroidery area. Attaching the magnets to the top of the fabric eliminates the need to sandwich the fabric between the outer and inner hoops, as in traditional hoops, reducing the risk of damaging your fabric.
Embroidering several designs after each other or doing endless embroideries are easy just by removing the magnets and moving the fabric. Each hooping is done so quick, you are ready to embroider in no time!
The Metal hoop is available in 3 sizes: Large Metal Hoop 240mm x 150mm, (part # H9204380-96), Medium Metal Hoop 180mm x 130mm, (part # H9203620-96) and Small Metal Hoop 100mm x 100mm, (part # H9204390-96) to suit all your needs*.
Now what stabiliser can I use with them you ask?
Nearly all stabilisers can be used with the Metal hoops. As with all embroidery you are best to match the stabiliser to your fabric rather than to your hoop. A lightweight fabric is suited to a lightweight stabiliser. To create free standing lace, you will need either a water based or heat dissolving stabiliser. Why don’t you check out our range of stabilisers and their uses here
The Hat Hoop Accessory makes monograming on caps and hats easy! Attach the Hat Hoop Accessory to the Medium Metal Hoop so the wide bar helps to flatten and stabilise your project.
The Metal Hoop Fabric Guide easily attaches to any metal hoop to act as a barrier to keep the rest of the project out of the way! Perfect for using with the small metal hoop when embroidering on baby clothes!
As you can see these metal hoops are a necessity for every embroiderer. The ease and speed of hooping and embroidering your fabric will have you creating endless projects!
Thread your sewing machine with regular sewing or decorative thread through the needle and regular sewing thread in the bobbin.
Select the stitch you would like to use. For example: the edging could be sewn onto the base fabric using a straight stitch and a 4mm twin needle or a right-justified wide decorative stitch. Note: Decorative stitches that use forward motion work best. (Avoid stitches with too much backward motion.)
Fold a 6mm ( ¼”) hem of base fabric to the wrong side, then finger press or iron.
Insert the folded edge of base fabric with the right side up into the left fabric guide, and the edging (right side up) into the right guide. Slide the folded fabric edge and the edging into the foot, prior to attaching the foot onto the sewing machine.
Make sure the base fabric and the edging slide easily through the openings. 6. Snap on the Join and Fold Edging Foot to the sewing machine.
Sew carefully, not too fast. If your machine has a speed control, reduce the sewing speed to easily guide the fabric and edging as you sew. Hold the fabric in your left hand and the edging in your right hand and sew.
A flat felled seam is an overlapping seam sewn flat. It is made by placing one edge inside a folded edge of fabric, then stitching the fold down. It is very useful for keeping the seam allowances flat and covering all raw edges. It is used for is extreme durability and can commonly be found on jeans, menswear and home decoration projects.
Decorative touches can be added by using contrasting thread. The best results are achieved on medium to heavy-weight fabrics.
Instructions for use:
Method One:
Snap-on the Flat-Felled Foot 9 mm Foot.
Place the wrong sides of the fabrics together and overlap the raw edges by using the red markings on the foot as a guide. The lower fabric should follow the marking on the right side of the foot and the upper fabric should follow the red marking on the right front side. (This will result in a double row of stitching on the right side of the garment. If you want a single row of stitching on the garment, stitch the right sides of the fabric together.)
Stitch fabric together with a straight stitch
Press the seam allowance to the left
Use the guides on the front of the Flat-Felled Foot to fold the wider seam allowance around the narrower seam allowance. Stitch in place using a straight stitch.
Method Two:
If you have a seam allowance of 15 mm (â…ť") included in your pattern, use the outer right
markings on the Flat-Felled Foot as a guide for both layers. Cut off 6mm from the top
seam allowance. Then continue with step 4.
The flat felled Foot 9mm part number is H4131855-45 and suitable for all models 1-9.
Why not add this foot to your collection by purchasing online here to receive a 10% discount with the coupon code Flat-Felled10 or at your local retailer today!*
*Offer valid until August 2, 2022. Not valid in conjunction with any other offer.
Creating those perfect edging pleats has never been so easy with the Edge Stitching Foot. The metal guide attached to the right-hand side of the foot allows you to align perfectly with the fabric for accurate stitching every time.
The wide 7mm opening in the foot allows you to adjust the needle, giving you the ability to vary the depth of your finished pleat.
Option: Although promoted for creating pleats, why not try the Edge Stitching Foot with a decorative stitch on the hem of a garment.
Instructions for use:
1. Snap on the Edge Stitching Foot.
2. Place project underfoot with the flange guide at the edge of the project.
3. Select straight stitch (or desired stitch) and adjust needle position so the stitching row will be sewn at desired distance from edge. (Adjust the straight stitch needle positions from side to side with the width adjustment.)
4. For additional parallel rows of topstitching, adjust needle position and sew
The Edge Stitching Foot part number is H4127967-45 for all models 1-8 and H9205700-96 for model 9 machines
Why not add this foot to your collection by purchasing online here to receive a 10% discount with the coupon code Edge-Stitching10 or at your local retailer today!*
*Offer valid until July 5, 2022. Not valid in conjunction with any other offer.
x
Turn too much into too easy.
Zero interest
Convenient fortnightly or
monthly installments
Terms of up to
36 months
For purchases
up to $20k
How to shop...
Select your purchase online
Select Payright as your
preferred payment option
Enter your contact details to sign up
or sign in to your Payright account
Once approved your
purchase will be dispatched
Right when you need it – Payright
Important Information:
We want to ensure you have a positive payment experience and have made the checkout process simple.
We take responsible lending seriously so credit is only extended to approved customers. Please
ensure you read the terms
and conditionsfor further information and note that PayRight is not available on all
purchases.
