Machine Compatibility
Orchidea, 1250, #1+, 1200, 1100, 1090, 1070, 1070s, 1050
990s, 990, 980, 960, 950s, 950, 945, 940
630, 620, 610, 190, 185, 180, 150, 120.
105, 100, 95, 90.
Prelude 360, 340, Daisy 335, 330, 325, 320, 315, 310, HV 250, 230, 225, 215, 210, 205,Scandinavia 100, Eden Rose 250M, Tribute 140M, Emerald 122, 118, 116
Rose 605, 600, Iris, Lily 555, 550, 545, 540, 535, 530, HV 500, Interlude 445, 435, Freesia 425, 415, HV 400, 350, Scandinavia 400, 300, 200, Emerald 183, 203, Designer Jade 35, Jade 20, Opal 650, 670
Designer Diamond Royale, Designer Diamond Deluxe, Designer Diamond, Designer Sapphire 85, Designer Ruby Royale, Designer Ruby Deluxe, Designer Ruby, Designer Topaz 65, 55Q, 50, 40, 30, 25, 20, Designer SE, SE LE, Designer 1, 11, Quilt Designer 1, 11 Sapphire 965Q, 960Q, 930, 875Q, 855, 850, 835, 830, Designer Brilliance 80, 75Q, Opal 690Q, Tribute 140C
Designer Epic, Epic 980Q, Designer Ruby 90
Designer Epic 3, Designer Epic 2, Epic 95Q, Epic Quilt 9
Machine Compatibility
Designer Epic 3, Designer Epic 2, Epic 95Q, Epic Quilt 9
Adjustable Stitch-In-Ditch Foot
Description
Not sure which group your machine belongs to? Check out the Machine compatibility chart
Stitching in the ditch means stitching in the finished seam of a quilt or binding.
There is usually a higher edge to the seam, the side where the seam allowances have been pressed to, and the lower side, the side without the seam allowances.
Stitching in the ditch means stitching in the finished seam of a quilt or binding.
There is usually a higher edge to the seam, the side where the seam allowances have been pressed to, and the lower side, the side without the seam allowances.
How to use:
- Snap-on the Adjustable Stitch-in-Ditch Foot. Thread with matching thread or invisible thread on top and thread to match your quilt back in the bobbin.
- Place the fabric to be stitched under the presser foot aligning the guide in the center of the foot with the seam. The guide will automatically fall on the low side of the seam and will stitch flawlessly down the seam of your quilt or binding.
- If the stitch is not in the seam you can move the needle up to three steps to the left or right to get the stitch perfectly lined up.
- To pivot ¼” (6 mm) from the end, stop sewing when the front line on the foot is even with the edge of the fabric.
$55.00
Description
Description
Stitching in the ditch means sewing directly in the finished seam of a quilt or binding.
The seam typically has a higher side where the seam allowances have been pressed and a lower side without the seam allowances.
How to use:
How to use:
- Snap on the Adjustable Stitch-in-Ditch Foot. Thread the machine with matching or invisible thread on top, and use thread that matches the quilt backing in the bobbin.
- Place the fabric under the presser foot, aligning the centre guide with the seam. The guide will automatically ride along the lower side of the seam, helping you stitch accurately in the ditch.
- If the stitching is not perfectly centred in the seam, adjust the needle position up to three steps to the left or right.
- To pivot 6mm (¼") from the edge, stop sewing when the front guideline on the foot aligns with the edge of the fabric.
Additional information
Additional information
| Weight | N/A |
|---|---|
| Part Number: | H9204570-96, H9205670-96 |
| Brand | Husqvarna Viking |
Related Products
