Mini Bead Foot 4mm

Machine Compatibility: 1, 2, 3, 4, 5, 6, 7, 8, 9

Not suitable for: EMERALD series, EDEN ROSE 250M, TRIBUTE 140M and 145M

Not sure which group your machine belongs to? Check out the Machine Compatibility Chart

Add some extra pizazz to your projects with some beading! The Mini Bead Foot (4mm) is perfect for this application.

1. Snap on the Mini Bead Foot.
2. Thread with Polyester invisible thread on top and sewing thread in a colour matching the fabric in the bobbin.
3. Select one of following stitches depending on which one is available on your Sewing machine:
   • Heirloom Applique stitch, length 4.0, stitch width 4.0,
   • Overcast stitch, length 0.9, width 5.0 for 8 and 9 length 9.0, width 5.0
   • Overcast stitch, length 5.0, width 4.0.
4. Place 4 mm string pearls under the foot, laying them in the groove on the underside of the Mini Bead Foot. Place stabilizer under the fabric. Lower the presser foot. Turn the handwheel to make some stitches by hand carefully. Stitch pearls to a scrap of fabric first
   to test thread tension, presser foot pressure, stitch length and width according to the beads. Make adjustments if needed. Stitch slowly. (With some stitches it may be necessary to adjust stitch length while sewing, or program a stitch for the best result.)